Untitled

Yaletrac® Cable Pullers

Yaletrac® cable pullers feature a lightweight, compact, high strength aluminium housing, smooth contour design with a large, flat bottom surface for increased stability in horizontal and vertical working positions.

Forward and reversing levers in tandem provide slim design and assure power transfer along the centre line.

Overload protection is by a shearing pin in the foward lever. Spare shear pins are conveniently located in the carrying handle or operating lever. A broken pin can be replaced without removing the load.

A lever disengages the rope clamp system allowing easy, smooth installation of the wire rope.

Yaletrac® uses a special flexible wire rope. It has six strands with a steel core and is identified by an orange strand. The rope is tapered at one end for easy threading and fitted with a safety hook on the other end.

The parallel arrangement of the clamping system protects the wire rope by distributing the clamping forces evenly. A long rope advance per each lever stroke increases the working speed.

The large opening in the top of the unit allows easy cleaning: simply flush the unit with water, apply motor oil for lubrication and the Yaletrac is again ready for use.

Yale Cable Puller LP Capacity 500 kg

A practical aid for pulling, lifting, tensioning and lowering in many applications in- and outdoors. A compact handy tool - ideal for service and assembly, for workshops and recreation. The stamped steel housing is lightweight and efficient. The complete set comprises of cable-puller with anchor bolt and clevis hook, telescope operating lever, 10 metres of wire rope, carrying handle and a 1 metre length anchor webbing sling.

Yale Cable Puller LM Pulling Force 500 - 1,800 daN

The use of lightweight aluminium alloy castings provide a lightweight, corrosion resistant pulling and tensioning unit. This product is not to be used for lifting. The double interlocking pawl system ensures safe function, all load bearing shafts are mounted on prelubricated bearings to reduce wear. All springs and shafts are manufactured from stainless steel. The lifting medium is a non-twisting, zinc plated, special steel cable. The cable pullers are fitted with fracture resistant suspension and load hooks. The hooks are fitted with safety latches and are free to rotate through 360 degrees. The cable puller LM can be used in single or double fall configuration. In double fall configuration, the pulling force is doubled and the lifting height is halved.

Little Mule® Cable Grip LMG Pulling Force 2,000 - 5,000 daN

The Little Mule® cable grip is a device for gripping, pulling and tensioning unsheathed wire ropes, cables and metal rods in all forms up to a tensile strength of 1,250 N/mm². The parallel jaws provide a firm, nonslip grip without causing damage to the wire. A special spring-loaded guide prevents the grip from dropping off the wire and affords instant release without jamming. The model LMG II-X is supplied with grooved jaws for use on wires with tensile strength of up to 1,650 N/mm²

Pulley Blocks Capacity 1,000 - 6,400 kg

One side of the Yale pulley blocks is hinged and can be opened for easy and quick positioning of the rope on the sheave. Swinging the hook in the direction of pull securely locks the pulley block. The high quality cast steel sheaves have machined grooves and are fitted with Permaglide® bushes. When choosing and classifying pulley blocks, take the "Principles for Rope Drives" DIN 15020 into consideration. Can be supplied with clevis suspension.